
04
WARNING: IT IS IMPORTANT THAT YOU STUDY AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND 
THE INSTRUCTIONS ON THE DEVICE. KEEP THIS MANUAL FOR FUTURE USE.
This device was developed and made with a view to providing maximum safety for the user. Incorrect use of the device 
may cause electric shock or fire. The protection built into this device will protect the user if the procedure below is 
observed in connection with installation, use and repair. This device is fully electronic and contains no parts which can be 
repaired by the user. 
THE HOUSING MUST NOT BE REMOVED. RISK OF DANGEROUS VOLTAGE. ONLY SKILLED TECHNICIANS ARE 
ALLOWED TO REPAIR THE DEVICE.
Heat
Do not place the device near 
sources of heating such as 
radiator, register, stove or other 
heat-producing devices (including 
amplifiers).
Water and moisture
The device must not be placed 
close to water, such as bath tub, 
wash basin, kitchen sink or 
wash tub, in a damp cellar or 
close to a swimming pool, etc.
Cleaning
Unplug the device before cleaning. 
Do not use liquid detergents and 
aerosol cleaning agents. Use a 
dry cloth.
Power cords
Wiring must be organised to 
prevent people from stepping on 
the cables and to avoid pinching 
by objects placed on or beside 
them. Take special care around 
sockets and plug boxes and 
where the cable leaves the device.
Overloading
Make sure that sockets, 
extension flexes and plug 
boxes are not overloaded as 
this may lead to fire or electric 
shock. 
Read the manual
On unpacking the device, 
please read the manual 
carefully and observe all 
instructions given.
Power supply
Only the power supply indicated on the 
rating plate must be used for this 
device. If you are not sure which power 
supply you have, please contact the 
distributor or the local electricity 
supplier. 
Earthing or polarization
If the plug cannot be inserted properly into the 
socket, or if the plug does not fit, the device must 
not be used in your country.   
          IMPORTANT SAFETY NOTICESVentilation
The housing is provided with slots and 
openings to ensure ventilation and reliable 
operation and protect the device against 
overheating. Do not block or cover these 
openings. The openings must never be 
blocked, for example by placing the device 
on a bed, a sofa, a carpet or similar surface.