EMC 014003051-00

FibreC hannel FC4700 Array to IP4700 File Server Conversion Guide

Factory Initialization

16. At the fcli> prompt, type clearlog and then press <Enter>.

17. Once ALL the disk LEDs have stopped flashing, type getlog at

the fcli> prompt and then press <Enter>. Verify that all disks

report successful completion of the zero disk operation.

NOTE: If disk drives in a DAE do not report starting factory zero, verify

that both fibre loop cables are connected, as required by the internal code.

fcli> getlog ↵

Press any key to continue... (or “q” to Quit) ↵

Event Date CRU Event (Message) Extended Status

1. 03/16/01 15:48:16 0_0 0x6fa (Factory Zero Started) 0x00

2. 03/16/01 15:48:16 0_1 0x6fa (Factory Zero Started) 0x00

3. 03/16/01 15:48:16 0_2 0x6fa (Factory Zero Started) 0x00

4. 03/16/01 15:48:16 0_3 0x6fa (Factory Zero Started) 0x00

5. 03/16/01 15:48:16 0_4 0x6fa (Factory Zero Started) 0x00

6. 03/16/01 15:48:16 0_5 0x6fa (Factory Zero Started) 0x00

7. 03/16/01 15:48:16 0_6 0x6fa (Factory Zero Started) 0x00

8. 03/16/01 15:48:16 0_7 0x6fa (Factory Zero Started) 0x00

9. 03/16/01 15:48:16 0_8 0x6fa (Factory Zero Started) 0x00

10. 03/16/01 15:48:16 0_9 0x6fa (Factory Zero Started) 0x00

11. 03/16/01 15:48:16 1_0 0x6fa (Factory Zero Started) 0x00

12. 03/16/01 15:48:16 1_1 0x6fa (Factory Zero Started) 0x00

13. 03/16/01 15:48:16 1_2 0x6fa (Factory Zero Started) 0x00

14. 03/16/01 15:48:16 1_3 0x6fa (Factory Zero Started) 0x00

15. 03/16/01 15:48:16 1_4 0x6fa (Factory Zero Started) 0x00

16. 03/16/01 15:48:16 1_5 0x6fa (Factory Zero Started) 0x00

17. 03/16/01 15:48:16 1_6 0x6fa (Factory Zero Started) 0x00

18. 03/16/01 15:48:16 1_7 0x6fa (Factory Zero Started) 0x00

19. 03/16/01 15:48:16 1_8 0x6fa (Factory Zero Started) 0x00

fcli > clearlog ↵