FibreC hannel FC4700 Array to IP4700 File Server Conversion Guide
13
Factory Initialization
Once the IP4700 banner is displayed, you have a maximum of 60 seconds to
enter ^V.
Entering ^V should cause the following to display immediately:
If Enabling Factory Initialization Startup does not
display, one of the following may occur:
–The system reboots and comes up to the IP4700 banner.
Starting SP Components. Please Wait.....
Raid System Started Successfully........
(the display will recycle)
–The system hangs.
In either case manually reset the SPs. Reset SP A first, then SP B.
You can reset the SPs by power cycling the system, as described in
step 3 on page12.
5. Enter ^V at the IP4700 banner.
@@@@@@
@@
@@
@@
@@
@@
@@@@@@
@@@@@
@@ @@
@@ @@
@@ @@
@@@@@
@@
@@
@@@
@@@
@@@
@@@
@@@@@@@
@@
@@
@@@@@@
@@ @@
@@
@@
@@
@@
@@
@@
@@
@@ @@
@@ @@
@@ @@
@@
@@
@@
@@
@@ @
@
@@ @
@
@@ @
@
@@
@@
Starting SP Components. Please Wait....
================================================
==== Enabling Factory Initialization Startup ====
================================================
Raid System Started Successfully......