Mounting Instructions | MODEL 3110B BICONICAL ANTENNA |
Step 3. Repeat Steps 1 and 2 with the other washer and biconical element.
Now you are ready to mount the antenna on a tripod for testing.
Belleville Washer | Balun |
|
Biconical Element
Output Connector
Clamp (Open Position)
MOUNTING INSTRUCTIONS
The mounting clamp of the Model 3110B uses standard 7/8x14 threads and comes with a 1/4x20 thread adapter for versatility when connecting to an ETS tripod or most other tripods for support.
After the mounting clamp is attached to a tripod, unscrew the latch and open the clamp. Insert the balun of the 3110B into the clamp and close the top over the balun. Move the screw latch to the closed position and tighten, so the balun is held securely. The cable can now be attached to the output connector.
2 | © EMC TEST SYSTEMS, L.P. – MARCH 2002 |
| REV F – PN 399108 |
