Emerson 00825-0100-4593 STEP 3 CONTINUED...

Quick Installation Guide

00825-0100-4593, Rev BA

July 2009

Rosemount 1151

STEP 3 CONTINUED...

The dc power supply should provide power with less than two percent ripple. The total

resistance load is the sum of the resistance of the signal leads and the load resistance of the

controller, indicator, and related pieces. Note that the resistance of intrinsic safety barriers, if

used, must be included.

Figure 2. Load Limitation

Code Vmin Vmax Rmin Rmax RL at Supply Voltage (VS)

S(1)

(1) A minimum of 250



is required for communication.

12 45 0 1650 RL = 43.5 (VS – 12)

Rmax

Rmin Vmin VSVmax

Operating

Region

4593_Rev_BA.fm Page 8 Friday, August 7, 2009 3:38 PM

Contents

Main 00825-0100-4360N Product Discontinued Rosemount 1151 Pressure Transmitter with 4-20 mA HART Protocol 00825-0100-4593, Rev BA July 2009 WARNING 2 Explosions could result in death or serious injury: IMPORTANT NOTICE STEP 1: MOUNT THE TRANSMITTER A. Applications STEP 1 CONTINUED... B. Optional Mounting Brackets STEP 1 CONTINUED... C. O-rings with Flange Adapters WARNING STEP 2: CONSIDER HOUSING ROTATION S TEP 3: CONNECT THE WIRING AND POWER U STEP 3 CONTINUED... Power Supply STEP 4: CONFIGURE THE TRANSMITTER STEP 5: CALIBRATE THE TRANSMITTER Verify Transmitter Configuration STEP 5 CONTINUED... Configure LCD Display STEP 5 CONTINUED... STEP 6: TRIM THE TRANSMITTER Full Trim Zero Trim STEP 6 CONTINUED... 4-20 mA Output Trim PRODUCT CERTIFICATIONS Approved Manufacturing Locations European Directive Information Hazardous Locations Certifications