Emerson 6081-P instruction sheet Sensor Wiring, General Information

6081-P	Instruction Sheet
October 2013	LIQ_MAN_ABR_6081-P

Sensor Wiring

Note

For additional wiring information on this product, including sensor combinations not shown here, please refer to either our online wiring programs or the Manual DVD enclosed with each product.

1056, 1057, 56, 5081, 6081, 54e, and XMT : http://www3.emersonprocess.com/raihome/sp/liquid/wiring/XMT/ 1066 and sensors with SMART preamps: http://www2.emersonprocess.com/en-US/brands/rosemountanalytical/Liquid/Sensors/Pages/ Wiring_Diagram.aspx 1055:

http://www3.emersonprocess.com/raihome/sp/liquid/wiring/1055/

General Information

pH and ORP sensors without preamps manufactured by Rosemount Analytical can be wired directly to the 6081-P wireless transmitter.

Sensor Wiring

To assist in sensor wiring, please refer to the one of the following resources:

1.Sensor Instruction Sheet – provided with each shipped sensor. Detailed wiring drawings show terminal block connections for each sensor lead.

2.Online wiring program available at http://www.emersonprocess.com/raihome/liquid/products/wiring/Xmt displays wiring schematics for all compatible pH sensors.

Note

All sensor wiring must be rated for ≥70 °C.

The following drawing identifies each terminal block lead position for pH sensors.

Figure 3. 6081 Sensor Wiring and Connection Points

8