POSITIONING THE SPEAKERS
Refer to the following speaker positioning diagram. All 5 satellites should be approximately the same distance from your listening position.
•Place center speaker either directly above or below your TV screen.
•Place front left and right speakers to the left and right of TV at approximately the same height as the center speaker.
•Place rear left and right speakers either in line with, or behind your listening position, at ear level, or slightly above, when seated.
•Place subwoofer on the floor in front of the room, either next to TV or in the corner, facing your listening position.
or
or
(Included)
Note: Speaker pedestals are for illustration only. Pedestals are not included.
DVD PLAYBACK
1.) Turn on your TV. If necessary press the Source or Video button on your TVs front panel or TV remote control to select the external source connected to your TVs Video In jack. (If necessary refer to your TVs instruction manual.)
2.) Press the STANDBY button on the AV101 remote control to turn the system ‘On’. If necessary press the DVD button on the front panel or the FUNCTION button on the AV101 remote control repeatedly to select the DVD function. The AV101 front panel display will show “DVD”, and the DVD logo screen should appear on your TV.
3.) Press the OPEN/CLOSE button on the remote control or front panel to open the Disc Tray.
Note: Remote must be pointed at the front of the player to operate properly.
4.) Insert DVD movie disc in tray with printed side facing up. Press OPEN/CLOSE button to close the disc tray. Player will read the disc and display shows LOADING. On some discs playback will start automatically. On other discs the DVD Menu Screen will appear. Press PLAY button to begin playback, or use the Cursor buttons (3/4/5/6) and then the ENTER button to select other playback options from the DVD menu.
5.) When you play A DVD movie disc, the player will automatically select DOLBY DIGITAL audio mode. If the DVD disc is recorded with Dolby Digital soundtrack you will hear sound from all 5 satellites plus subwoofer. If the DVD disc does not come with DOLBY DIGITAL and comes either Dolby Surround, Dolby Pro Logic or 2 channel Stereo soundtrack, the subwoofer will not operate. In this case press the DSP MODE button on the front panel or the remote control to select 2 CH. STEREO audio mode. This will activate the subwoofer.
6.) Rotate the MASTER VOLUME control of the player or press the VOLUME 5/6 buttons of the remote control to adjust volume level as desired.
7.) When finished watching, press the STOP button and/or the OPEN/CLOSE button. Remove the disc, then press the STANDBY button on the remote control to turn the player ‘Off’. The STANDBY indicator comes ‘On’again.
