Emerson CF772ORB00, CF772SW00, CF772BS00 owner manual How to Hang Your Ceiling Fan

How to Hang Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 10).

!WARNING

The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 15.9kg. (35 lbs.) or less”.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 15.9kg. (35 lbs.) or less”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 11.)

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

2.Carefully lift the fan and seat the hanger ball/ downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 12). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figure 11).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

	CEILING
AT LEAST
7'
Figure 10	FLOOR

OUTLET

BOX

TWO SCREWS

SUPPLIED WITH

OUTLET BOX

HANGER

TAB BRACKET

Figure 11

NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.

OUTLET

BOX

HANGER

BRACKET

HANGER BALL/

DOWNROD

ASSEMBLY

Figure 12

!WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

8 U.L. Model No.: CF772