To install the battery

Open the battery compartment cover on the bottom of the radio by pressing on the locking tab in the direction of the “arrow” and lift it up.

Connect the 9-volt battery to the battery terminal. It can only be connected one way.

Push the battery into the battery compartment and replace the cover.

Power Failure Iindicator

If no battery is installed in the radio, or if the battery in the compartment is weak or dead, the time and alarm settings will be lost if the power is interrupted.

When the power is restored the clock display will begin flashing. This is your indication that the time display is incorrect and needs to be reset.

Important:

After you reset the time, be sure to reset your alarm settings as well.

5

CK5029_030405.p65

5

4/3/2005, 15:08

Page 6
Image 6
Emerson CK5029 owner manual To install the battery, Power Failure Iindicator