CD Operation, Normal Playback, Pause Operation

CD OPERATION

NORMAL PLAYBACK

1.Slide the FUNCTION selector to the CD position.

2.Press the POWER button to turn the unit ‘On’.

3.Press the CD door OPEN button. Place your disc on the center spindle with the printed label side facing up and gently press down on the disc near the center hole to make sure that it is firmly locked in place on the spindle.

4. Close the CD door, pressing down on the right side marked “CLOSE” to make sure that the door locks properly. The disc will spin as the player reads the Table of Contents on the disc. The disc stops and the display shows the total number of tracks for about 5 seconds and then returns to the correct time display.

5.Press the PLAY/PAUSE button to begin playback. The display shows “01” and playback begins on track 1. After 5 seconds the display returns to the correct time. Playback continues until all tracks have been played. To see the track number during playback presses the DISPLAY button. The track number appears for 5 seconds and then the correct time reappears.

6.When all tracks have been played the player stops. To stop playback before the disc ends press the STOP button at any time.

7.Press the CD door OPEN button to open the door. Remove your disc and close the door. Return your disc to its protective storage case.

8.Press the POWER button to turn the power ‘Off’.

PAUSE OPERATION

To pause momentarily press the PLAY/PAUSE button during playback. The sound stops but the disc continues to spin. The track number flashes for 5 seconds