Emerson CKS5060S, CKS5060B Care And M Aintenance, Mains Plug For UK Only, Brown Live Blue Neutral

CARE AND M AINTENANCE

Mains Plug (For UK Only)

The Mains lead supplied with this apparatus is fitted with a standard 13-Amp plug (BS.1363) which is fitted with a 3 Amp fuse. When changing or examining the fuse, the correct 3 Amp fuse – ASTA or BSI approved (BS.1362) must be fitted.

The 13-Amp plug is the most widely used in the UK and should be suitable for most users.

However some locations (mainly older buildings) may not be equipped with normal 13-Amp sockets. In such cases it is recommended that a suitable plug adapter be purchased from you dealer (rather than remove the plug). However, should you decide to change the plug, please follow the instructions below:

IMPORTANT

The wires in the Mains load are coloured in accordance with the following code:

Brown : Live.

Blue : Neutral.

As the colours of the wires in the Mains load of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

•The wire which is colored BLUE must be connected to the terminal which is marked with the letter “N” or coloured black.

•The wire which is coloured BROWN must be connected to the terminal which is marked with the letter “L” or coloured red.

DO NOT MAKE ANY CONNECTION TO THE LARGER PIN MARKED WITH THE LETTER “E” OR BY THE SYMBOL OR COLOURED “GREEN” OR “GREEN-AND-YELLOW”.

20

CKS5060_090606.p65 20

6/9/2006, 9:46