Grounding Lead
When using a grounding adapter, make sure the receptacle box is fully grounded.

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

If it is necessary to use an extension cord, use only a three wire extension cord that has a three blade grounding plug, and a three slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be equal to or greater than the electrical rating of the appliance.

INSTALLATION

1. Steady, flat location: If the refrigerator is not leveled during installation. The doors may not close or seal properly, causing cooling, frost, or moisture problems. It is very important of the refrigerator to be level in order to function properly.

To level your refrigerator, you may either turn the level leg clockwise to raise that side to the refrigerator or turn counter

– clockwise to lower that side. Having someone push against the top of the refrigerator take some weight off the leveling leg. This makes it easier to adjust the leveling leg.

2. Ventilation: Do not block air vents.

3. Power supply:

• Check your local power source. This refrigerator requires a 120V, 60Hz power supply.

• Use a receptacle that will accept the ground prong. The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

A. Longer cord sets or extension cords are available and may be used if care is exercised in their use.

B. If a long cord or extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the extension cord must be a grounding-type 3-wire cord, and (3) the longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally.

NOTES:

• The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

• If you have only a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

When using a 3-pronged plug

3-pronged Receptacle

Screw

Receptacle

3-pronged

Receptacle

Grounding

Receptacle

plug

Box Cover

Adapter

Box Cover

2

Page 2 Page 4
Page 3
Image 3
Emerson CR500 owner manual Installation, Power supply
Page 2 Page 4

CR500 specifications

The Emerson CR500 is a sophisticated monitoring solution designed to enhance the operational efficiency and reliability of critical processes and systems. This innovative platform is widely used in various industries, including oil and gas, food and beverage, pharmaceutical, and manufacturing, where precision and consistency are paramount.

One of the standout features of the Emerson CR500 is its advanced data acquisition capabilities. It supports a wide range of input types, including analog, digital, and thermocouple signals, enabling it to gather comprehensive data from diverse sources. This flexibility allows operators to monitor multiple parameters simultaneously, providing a holistic view of their operations.

The CR500 also boasts robust connectivity options. With Ethernet, Modbus, and wireless communication protocols, it facilitates seamless integration into existing industrial networks. This connectivity enhances data sharing and collaboration across different departments and locations, crucial for making informed decisions quickly.

In terms of technology, the CR500 employs cutting-edge sensors and data processing algorithms. These advanced technologies ensure high accuracy and reliability in measurements, minimizing the risk of errors in critical applications. Furthermore, the device is designed for high durability, making it suitable for use in harsh environments where temperature variations and exposure to chemicals can occur.

Another key characteristic of the Emerson CR500 is its user-friendly interface. The device features a clear display and intuitive navigation, allowing operators to easily access and interpret data. This accessibility is vital for quick troubleshooting and analysis, saving time and resources during operation.

Additionally, the CR500 supports advanced analytics and reporting functionalities. Users can generate detailed reports and trend analyses that help in understanding performance metrics over time. This capability empowers organizations to optimize processes, reduce downtime, and enhance overall productivity.

Security is a crucial aspect of the CR500’s design. It incorporates robust cybersecurity measures to protect sensitive data from unauthorized access, ensuring compliance with industry standards and regulations.

In summary, the Emerson CR500 is an advanced monitoring solution that combines versatility, reliability, and user-friendly features. Its extensive connectivity, high accuracy sensors, and analytical capabilities make it an essential tool for industries seeking to enhance their operations and maintain competitive advantage in today's fast-paced market. Whether for monitoring environmental conditions or critical manufacturing processes, the CR500 stands out as a reliable choice for any organization.
Top Page Image Contents