CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1 | 2 |
|
2 | 3 |
|
1 | 1 | 2 |
You cannot program a disc during playback. If the disc is playing, press the
STOP (■)/POWER OFF button ❶ to first stop playback and then follow the programming steps as follows. Press the PROG button ❷; the track number and
PROG indicator will blink in the CD display.
Select the first track to be played back
using the SKIP/SEARCH 
❶ or 
❷button, then press the PROG button
❸ again. Repeat this step to program additional tracks up to a maximum of 20 tracks.
3 |
|
1 | 2 |
| 3 |
4 |
|
1 | 2 |
Press the PLAY/PAUSE ( 
) /POWER ON button ❶ to begin Programmed playback and adjust the VOLUME control ❷ and DBBS switch
❸as desired.
To skip forward or backward through the programs, press the SKIP/
SEARCH 
❶ or 
❷ button. When the disc is through playing, it will stop.
NOTES:
•Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
•As each program is played, the track number is shown in the display.
•To clear the memorized program: press the STOP (■)/POWER OFF button again while in the stop mode, wait approximately 60 seconds and the unit will turn off or open the CD compartment.
•Programming is the ability to preselect the order in which a series of tracks will be played.
•Each track may be stored in the program memory as many times as desired (up to 20 tracks).
12
