OPERATION (CONTINUED)

TO PLAY A TAPE

CARE AND MAINTENANCE

CASSETTE TAPE USAGE

1

Lift up the cassette door and insert a prerecorded tape. Close the cassette door. Set the Function switch to the TAPE position.

3

To stop the tape before it reaches the end, push the STOP button.

2

1 2

Push the PLAY button to start

playback and adjust the VOLUME control as desired.

AUTOMATIC STOP

This cassette player has a built-in Automatic Stop System that stops the tape when it reaches the end in the Play mode.

Longer length tapes of 45 (C-90) and

60 (C-120) minutes of playing time on

each side are not recommended. These tapes use thinner material and have a greater chance for malfunction

such as tape spillage from the cassette,

internal binding and tape tearing. Use only high quality tapes. If there is any slack in the tape, remove it before

inserting the cassette. To do so, place a pencil in one of the hubs and rotate it until the slack is taken up.

CARE AND MAINTENANCE

Clean the tape head, capstan and pinch roller using a cotton swab slightly moistened with alcohol. Avoid scratching the head surface. To clean the unit housing, use a soft cloth slightly dampened with water and wipe dry.

Cotton Swab

Capstan

TO FAST FORWARD A TAPE

1

 

TO FAST FORWARD A TAPE

 

 

1

2

To rapidly advance the tape, push

the Fast

Forward button . To

 

 

rapidly advance the tape while in

 

 

the play mode, push the STOP

 

 

button

before pressing the Fast

 

 

Forward button .

4

TROUBLESHOOTING GUIDE

Should this unit develop a problem, check the following before seeking service.

SYMPTOM

POSSIBLE

POSSIBLE

CAUSE

SOLUTION

 

GENERAL

 

 

Power does

Batteries are weak,

Insert batteries

not come on.

dead or not inserted

properly or replace with

 

correctly.

fresh batteries.

RADIO

 

 

No sound.

Function switch not

Set Function switch

 

set to RADIO position.

to RADIO position.

 

VOLUME control at

Turn the VOLUME

 

minimum position.

control up.

Noise or sound

FM–Interference.

Turn the unit for

distorted.

 

best reception.

 

 

 

CASSETTE

 

 

 

 

 

No sound.

Function switch not

Set Function switch to

 

set to TAPE position.

TAPE position.

 

 

 

 

VOLUME control at

Turn the VOLUME

 

minimum position.

control up.

 

 

 

Sound distorted.

Dirty head.

Clean head.

 

 

 

Head

 

 

Pinch Roller

CAUTION: Never use chemicals such as benzene or paint thinner for cleaning, otherwise the case may become deformed or discolored.

5

LIMITED WARRANTY

Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $5.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. Send your unit to:

Emerson Radio Corp.

5101 Statesman Drive,

Irving, TX 75063.

This warranty does not cover damage from negligence; misuse; abuse; accident; failure to follow operating instructions; commercial use; rental; repairs by an unauthorized facility; or products purchased, used, serviced or damaged outside of the United States.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AU898H

EMERSON

 

PART NO.: 21-2058

Printed in China

607-02

5101 Statesman Drive,

Irving, TX 75063.

6

7

Page 2
Image 2
Emerson DTE200 Care and Maintenance, Troubleshooting Guide, To Play a Tape, Cassette Tape Usage, To Fast Forward a Tape

DTE200 specifications

The Emerson DTE200 is a state-of-the-art device designed to enhance operational efficiency and reliability in various industrial applications. As part of Emerson's Intelligent Plant portfolio, the DTE200 serves as a vital component in modern automation systems, especially for companies looking to optimize their processes.

One of the most significant features of the DTE200 is its robust communication capabilities. Equipped with various protocols such as Ethernet/IP, Modbus TCP, and OPC UA, this device ensures seamless connectivity and data exchange between different systems and devices. This flexibility allows operators to incorporate the DTE200 into their existing infrastructure without major modifications, thus reducing downtime and operational disruptions.

The DTE200 also boasts advanced data processing technologies that enable real-time monitoring and analysis of system performance. With its built-in analytics tools, users can gain valuable insights into their processes, helping to identify inefficiencies and areas for improvement. This not only enhances productivity but also contributes to better resource management and cost savings.

Another important characteristic of the DTE200 is its user-friendly interface. The device features an intuitive design that simplifies configuration and operation, making it accessible to operators with varying levels of expertise. The clear display and straightforward navigation contribute to quicker troubleshooting and maintenance, minimizing the need for extensive training.

Durability is another hallmark of the Emerson DTE200. Designed to withstand harsh industrial environments, the device is constructed with high-quality materials that provide resistance to temperature fluctuations, vibration, and moisture. This resilience ensures reliable performance even in challenging conditions, making it an ideal choice for applications in manufacturing, oil and gas, and other heavy industries.

In terms of security, the DTE200 incorporates advanced cybersecurity measures to protect sensitive data and prevent unauthorized access. This is particularly critical in an era where cyber threats are a growing concern for industrial operations. The device supports multi-layered security protocols, ensuring that data integrity and confidentiality are maintained.

Overall, the Emerson DTE200 stands out as a comprehensive solution for enhancing industrial automation. With its advanced communication protocols, real-time analytics, user-friendly design, and robust durability, the DTE200 is well-suited for businesses seeking to drive efficiency, reduce risks, and streamline their operations in an increasingly competitive market.