Emerson EWD7004 owner manual Connection to an Audio System, Rear Terminals, Digital Audio OUT

Connection to an Audio System

Method 1

Stereo system

Analog audio input jacks

AUDIO R L

Audio cable

(supplied)

Method 2

Dolby Digital decoder,

MD deck or DAT deck

Digital audio input jack

COAXIAL

Audio Coaxial

Digital cable

(commercially

available)

AUDIO OUT L

DVD player

AUDIO OUT L

DIGITAL AUDIO OUT

(Analog)	DIGITAL AUDIO OUT
AUDIO OUT
	COAXIAL R

DIGITAL

AUDIO OUT

COAXIAL R

Note

•If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set “DOLBY DIGITAL” to “ON” in the AUDIO menu. (Refer to pages 14-15)

•The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “OFF” in the AUDIO menu. Playing a DVD using incorrect settings may genarate noise distortion, and may also damage the speakers. (Refer to pages 14-15)

•Set “DOLBY DIGITAL” to “OFF” in the AUDIO menu for con- necting to an MD deck or DAT deck. (Refer to pages 14-15)

•By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality 5.1ch Dolby Digital sur- round sound as heard in the movie theaters.

Setup

Rear Terminals

AUDIO OUT jacks	COMPONENT VIDEO OUT jacks
Connect the supplied audio cables here	Connect optional component video cables here
through the audio in jacks of a television or	through the component video in jacks of a television.
other audio equipment.

AUDIO OUT L		Y	CR/PR
			COMPONENT
DIGITAL AUDIO OUT			VIDEO OUT
COAXIAL	R	VIDEO CB/PB	S-VIDEO
		OUT	OUT

COAXIAL jack	VIDEO OUT jack
Connect an optional coaxial digital audio	Connect the supplied yellow video
cable here through the coaxial digital audio	cable here through the TV’s video
in jack of a decoder or audio receiver.	in jack.

S-VIDEO OUT jack

Connect an optional S-Video cable here through the S-video in jack of a televi- sion.