PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the VOL(ume) ▲button so that "PICTURE" is selected.
3)Select the feature you wish to adjust with the CH(annel) ▲or ▼button and adjust it with the
VOL(ume) ▲or ▼button.

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.
Note:If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TVscreen.
4) Press the CH(annel) ▲or ▼button to point to "[ENG]".
5) Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using
the VOL(ume) ▲or ▼button.
6) Press the MENU button to exit the menu.

CHANNELPRESETTING

To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TVscreen.
3) Press the CH(annel) ▲or ▼button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲button.
4) Press the CH(annel) ▲or ▼button to point to "AUTO PRESET CH".
Then, press the VOL(ume) ▲button.
The tuner scans and memorizes all active channels in your area.
●The TVdistinguishes between standard TV channels and cable (CATV)
channels.
●When AUTO PRESETCH action is completed, the lowest memorized
channel reappears on the screen.
●When you press the CH(annel) ▲or ▼button after selecting AUTO PRESETCH,
the tuner will stop at the memorized channels only.
●The TVmay recognize TV channels to be CATV channels by receiving conditions. In this case,
try AUTO PRESETCH action again in the fine receiving conditions.
●When AUTO PRESETCH is activated where there is no TV signal input, "NO TV SIGNALS"
will appear on the display after the completion of the channel scanning.
[ADD/DELETE FUNCTION]
1)Press the MENU button so that the menu display appears on the TV
screen.
2)Press the CH(annel) ▲or ▼button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲button.
3)Press the VOL(ume) ▲button so that "ADD/DELETE" is selected.
4)Use the CH(annel) ▲or ▼button to select the channel you wish to put
into memory or to erase from memory.
Note:The display will return to the normal screen automatically in about
10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.
●Press the VOL(ume) ▲or ▼button to light up the channel number
in LIGHTBLUE if you wish to add the channel into memory.
●Press the VOL(ume) ▲or ▼button to light up the channel number
in LIGHTRED if you wish to erase the channel from memory.
5)Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

RESUME FUNCTION

If the power fails or is disconnected while the TVis powered on, the TV will turn on automatical-
ly when the power resumes.
Type of
broadcast
Regular -None-
Stereo
broadcast STEREO
SAP
Menu
Selection MAIN MONO SAP
-None- -None-
MONO STEREO
SAP
MAIN MAIN
PREPARATION FOR USE

WATCHING ATV PROGRAM

1)Press the POWER button to turn on the TV.
2)Select the desired channel with the CH(annel) ▲or ▼button.
3)Adjust the volume to the desired listening level using the VOL(ume) ▲or ▼button.
4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEPTIMER

The sleep timer function allows you to have the POWER automatically turn
off after a set time period.
1)Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2)You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be
set up to 90 minutes, 10 minutes each time the SLEEP
button is pushed. (The timer display counts up and sleep
timer will be displayed on the screen when you press the
SLEEPbutton on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10
To cancel the sleep timer:
Press the SLEEPbutton repeated-
ly until "SLEEP0" is displayed.
You may view specially labeled (cc) TVpro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
1)Press the MENU button so that the menu
display appears on the TVscreen.
2)Press the CH(annel) ▲or ▼button to point
to "CAPTION".
3)Press the VOL(ume) ▲or ▼button to select
the mode you wish.
4)When done, press the MENU button to exit
the menu.
: Press the VOL(ume) ▲or ▼button.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ADD/DELETE
AUTO PRESET CH
ADD/DELETE
AUTO PRESET CH
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
[To Select STEREO, MONO orSAP in Stereo broadcast]
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲or ▼button to point to "TV SOUND".
3)Press the VOL(ume) ▲or ▼button to select your desired stereo mode. ([MAIN], [MONO] or
[SAP].)
To show the status, press the DISPLAY
button on the remote control.
SAP:Second Audio Program, which
means your program, can also be
received in a second language or
sometimes a radio station.
Type of
broadcast
Regular -None-
Stereo
broadcast STEREO
SAP
Menu
Selection MAIN MONO SAP
-None- -None-
MONO STEREO
SAP
MAIN MAIN
Type of
broadcast
Regular -None-
Stereo
broadcast STEREO
SAP
Menu
Selection MAIN MONO SAP
-None- -None-
MONO STEREO
SAP
MAIN MAIN
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MONO]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [SAP]
: Press the VOL(ume) ▲or ▼button.
[-] GAME MODE [+]
OFF ON
[-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+] [-] SHARPNESS [+]
OPERATIONS
: Press the CH(annel) ▲or ▼button.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C1]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C2]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T1]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T2]
TV SOUND [MAIN]
GAME MODE
Set to the most suitable position for TV
GAME.
[+] : ON [-] : OFF
BRIGHT
Adjust until the darkest parts of the picture are
as bright as you prefer.
[+] : increase brightness [-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast [ -] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color [ -] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone [ -] : reddish tone
SHARPNESS
Adjust to detail in the picture.
[+]:increase sharpness [-]:decrease sharpness
Notes:
● “+” is achieved by pressing the VOL(ume)
▲ button and “-” by pressing the VOL(ume)
▼ button.
●In the above steps, the picture adjustment
display will disappear from the TVscreen
automatically after about 10 seconds if you
do not press any buttons. Press the MENU
and VOL(ume) ▲button so that "PIC-
TURE" is selected. Then, press the
CH(annel) ▲or ▼button repeatedly until
the display returns to the screen.
●If you adjust any picture control after you
set the Game mode to [ON], the Game mode
is set to [OFF] automatically.
[USING THE GAME BUTTON]
You can set the Game mode and front
AUDIO/VIDEO input mode at the same time
by pressing the GAME button on the remote
control. “GAME” appears on the TVscreen.
●To exit the Game mode and external input
mode, press the GAME button on the remote
control again.
●To cancel the Game mode only, adjust the
picture control. The Game mode will be set to
[OFF] automatically as explained in the pre-
vious section. In this case, “VIDEO2”
(AUDIO/VIDEO input mode)instead of
“GAME” appears on the TVscreen.
●If you press the GAME button when the TV
is off, the TVturns on and will be in the
Game mode and external input mode auto-
matically.