Emerson EWL20D6 owner manual Playing a Disc, Basic Playback, Getting Started

PLAYING A DISC

POWER PICTURE SELECT EJECT

	3
SKIP	ZOOM	MUTE
REV	PLAY	FWD
	STOP
PAUSE SLOW		DISC
		MENU
DISPLAY
	ENTER
SETUP	TITLE	RETURN

•Shaded buttons are used for following operation.

BASIC PLAYBACK

GETTING STARTED

Turn on the power of amplifier and any other compo- nents, if necessary.

1 Press [POWER] then the power will turn on.

POWER

2 Open the disc door manually.

3 Insert a disc with the label facing back of the unit to start playing it. By simply placing the disc gently into the slot, it will be loaded auto- matically, then close the disc door manually.

•Playback will start from the first chapter/track of the disc.

•If the playback does not start automatically, press [PLAY O].

•When you playback a DVD which features a title menu, it may appear on the screen. In this case, refer to “TITLE MENU” on page 19.

4 Press [STOP C] to stop playback.

STOP

5 Press [EJECT A] to remove the disc from the unit.

EJECT

NOTE

•When the DVD mode has been switched to the TV mode, the DVD mode shuts down first and then the TV picture and sound appears in about 4 seconds. Similarly, when [POWER] is pressed to turn off in the DVD mode, this mode shuts down first and then the unit is turned off.

•“ ” may appear at the top-right on the TV screen during operation, warning that a pro- hibited operation has been encountered by the DVD or the disc.

•With DVDs that use titles for playback pro- gram signals, playback may start from the second title or it may skip these titles.

•During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

•If the disc doesn’t come out at step 5, press and hold [EJECT A] on the unit to remove the disc from the unit.

EN – 18 –