Emerson EWR10D4 owner manual Functional overview

Before you start

Functional overview

Front Panel	1	2 3 4 5 6			7	8	9
			REV	FWD	OPEN / CLOSE
					REC SPEED
		S-VIDEO	VIDEO	L AUDIO R

		15	14 13 12 11	10
1.	POWER button			9. Display
	Press to turn the DVD recorder on and off.			Refer to “Guide to Displays on the front panel” on
	If timer programmings have been set, press to			page 12.
2.	set the unit in timer-standby mode.			10. Remote control sensor
	STOP C button			Receive signals from your remote control so that you
	Press to stop play or recording.			can control the DVD recorder from a distance.
3.	REV H button			11. REC SPEED button
	Press to skip to the previous chapter or track.			Press to switch the recording speed.
4.	Press and hold for 1.5 seconds to fast reverse.			12. REC button
	PLAY B button			Press to start recording.
5.	Press to start or resume play.			13. AUDIO INPUT jacks (LINE2)
	FWD G button			Use to connect external equipment with standard
	Press to skip to the next chapter or track.			audio cables.
6.	Press and hold for 1.5 seconds to fast forward.			14. VIDEO INPUT jack (LINE2)
	CH L / K button			Use to connect external equipment with a standard
	Press to change the channel up and down.			video cable.
7.	OPEN/CLOSE A button			15. S-VIDEO INPUT jack (LINE2)
8.	Press to open or close the disc tray.			Use to connect the S-Video output of external equip-
	Disc tray			ment with an S-Video cable.
	Place a disc when open.
		1		2 3 4	5	6
Rear Panel

Before you start Connections Getting started Recording Playing discs

		11	10	9	8	7
1.	AC Power Cord	7.	TV ANTENNA OUT jack
	Connect to a standard AC outlet to supply power to this		Use to connect an antenna cable to pass the signal
	unit.		from the TV ANTENNA IN to your TV monitor.
2.	AUDIO OUTPUT jacks 1, 2	8.	S-VIDEO INPUT jack(LINE1)
	Use to connect a TV monitor, AV receiver or other		Use to connect the S-Video output of external equip-
	equipment with standard audio cables.		ment with an S-Video cable.
3.	VIDEO OUTPUT jack	9.	VIDEO INPUT jack(LINE1)
	Use to connect a TV monitor, AV receiver or other		Use to connect external equipment with a standard
	equipment with a standard video cable.		video cable.
4.	S-VIDEO OUTPUT jack	10. AUDIO INPUT jacks(LINE1)
	Use to connect the S-Video input of a TV monitor, AV		Use to connect external equipment with standard
	receiver or other equipment with an S-Video cable.		audio cables.
5.	COMPONENT VIDEO OUTPUT jacks	11. COAXIAL DIGITAL AUDIO OUTPUT jack
	Use to connect a TV monitor with component video		Use to connect an AV receiver, Dolby Digital
6.	inputs with component video cables.		decorder or other equipment with a coaxial digital
	TV ANTENNA IN jack		input with a digital coaxial cable.
	Use to connect an antenna.

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the DVD recorder.

•This unit does not have the RF modulator.

Editing Changing the SETUP menu Others

Español

7