Emerson EWV601M Recording Function, Viewing and Recording Same Program, Copying a Video Tape

RECORDING FUNCTION

Before recording, make sure:

● The desired channel is selected by pressing the num- ber buttons on the remote control or the CHANNEL Up/Down button. (If you connected the VCR to a cable box or satellite box as in "Basic connections" on page 6, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. In this case, you can ONLY record and view the SAME channel. )

● There is a tape with its safety tab into the VCR.

● The desired recording speed is selected in SP(stand- ard play) or SLP(super long play) mode by pressing the TAPE SPEED button on the VCR.

Tape Speed		Recording/Playback Time
Type of tape	T60		T120	T160
SP mode	1 hour		2 hours	2-2/3 hours
SLP mode	3 hours		6 hours	8 hours

● TV STEREO or SAP is selected.

VIEWING AND RECORDING

THE SAME PROGRAM

1) Begin the recording by pressing the RECORD button.

●To temporarily stop recording or resume it, press the PAUSE/STILL button. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head.

2)Stop the recording by pressing the STOP button when recording is completed.

OTR(One Touch Recording)

This function enables you to set the recording length sim- ply by pressing the REC/OTR button on the VCR.

1)Begin OTR by pressing the REC/OTR button on the VCR repeatedly until the desired recording length appears.

●Recording stops when 0:00 is reached.

Press	Display	Recorded Length
1 press		(normal recording)
2 presses	0:30	30 minutes
3 presses	1:00	60 minutes
↓	↓	↓
17 presses	8:00	480 minutes
18 presses		(normal recording)

MTS (Multi-Channel Television

Sound) SYSTEM

When you play a VHS tape, or receive a broadcast on the VCR tuner channel you are watching, the status shown below will appear when you press the DISPLAY button on the remote control. When you record the MTS broadcast signal, you need setting MTS mode.

STOP		12:00AM
		CH 32	1]
		SAP
		STEREO
				2]
SP	0:00:00	HIFI

1] Press the MENU button and select "TV STEREO" or "SAP" by pressing the PLAY or STOP button. Then, press the F.FWD button so that [ON] appears next to your desired item on the TV screen. To exit, press the RESET/EXIT button.

●Although a program may be broadcast in both stereo and second audio, you must select the recording mode in TV STEREO or SAP before you record a broadcast.

2] Press the MENU button and select "AUDIO OUT" by pressing the PLAY or STOP button. Then, press the F.FWD button. Next, select "HIFI" or "MONO" by pressing the PLAY or STOP button. To exit, press the RESET/EXIT button.

●While the VCR is set in HIFI stereo mode, HIFI appears on the TV screen. While the VCR is set in monaural(MONO) mode, HIFI disappears from the TV screen.

MTS RECORDING/MONITOR MODE

Type of	Display on	STEREO/SAP	Hi-Fi audio track		Normal audio
broadcast	the TV	Selection	(2-channel)		track
	screen		L-channel	R-channel
Regular	-None-	-Invalid-	Mono	Mono	Mono
(monaural
audio)
Stereo	STEREO	-Invalid-	L	R	L+R
broadcast
Bilingual	SAP	TV STEREO*	Main audio	Main audio	Main audio
broadcast			program	program	program
		SAP*	Sub audio	Sub audio	Sub audio
			program	program	program
Stereo &	STEREO	TV STEREO*	L	R	L+R
Bilingual	SAP	SAP*	Sub audio	Sub audio	Sub audio
broadcast
			program	program	program

* You must select the recording mode in TV STEREO or SAP before you record a broadcast.

COPYING A VIDEO TAPE

You can make copies of video tapes made by friends or relatives for your enjoyment.

Warning:Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

Connect the recording VCR(this unit), the playing VCR(an- other source) and your TV using the following diagram.

Audio/Video cables	[Recording VCR]			[TV set]
				(Use for monitoring)
(not supplied)	(this unit)
	AUDIO		ANT	Coaxial cable
LEFT RIGHT		L	IN
		R		(supplied)
OUT	OUT	IN
IN	VIDEO		CH3 CH4	ANT in
AUDIO VIDEO	OUT	IN
			OUT

[Playing VCR]

(another source)

1)Insert a pre-recorded tape into the playing VCR.

2)Insert a tape with its safety tab into the recording VCR.

3)Press the TAPE SPEED button on the recording VCR to select the desired recording speed (SP/SLP).

4)Select the "L1" or "L2"position on the recording VCR. See page 6, under "Using audio/video input jacks".

5)Press the REC/OTR button on the recording VCR.

6)Begin playback of the tape in the playing VCR.

●For best results during dubbing, use the VCR’s front panel controls whenever possible. The remote con- trol might affect the playing VCR’s operation.

●Always use video-quality shielded cables with RCA- type connectors. Standard audio cables are not rec- ommended.

- 10 - EN

0J01