Emerson GP815 owner manual Power Failure Indicator, To install the battery

To install the battery:

•Open the battery compartment cover on the

bottom of the radio by pressing the tab in the direction of the arrow.

•Connect the 9-volt battery to the battery terminal. It can only be connected one way.

• Push the battery into the battery compartment and replace the cover.

POWER FAILURE INDICATOR

If no battery is installed in the radio, or if the battery in the compartment is weak or dead, the time and alarm settings will be lost if the power is interrupted. When the power is restored the clock display will begin flashing. This is your indication that the time display is incorrect and needs to be reset.

IMPORTANT:

After you reset the time, be sure to reset your alarm settings as well.

5

GP815_ib082003.p65 5

20/8/2003, 11:43