PROGRAMMED PLAYBACK

You can program the player to play only the tracks that you want to hear, in the specific order that you want to hear them. Up to a total of 24 tracks can be programmed. You may program certain tracks to play more than once if desired.

IMPORTANT: The player can only be programmed when it is in the Stop mode and the total number of tracks and playing time appear on the display. If the display is blank press the PLAY/PAUSE button to start the disc. When playback

begins press the STOP button. If the disc was playing, press the STOP button so that the total tracks and playing time appear on the display.

1.While the total tracks and playing time appear on the display press the PROG (Program) button. "PROG" indicator flashes and Program No. "P - 01" appears.

PROG

2.Press SKIP FWD or SKIP REV button until the first track to be programmed appears in the display.

Example: Track # 7.

PROG

3.Press the PROG (Program) button again to enter the selected track in the memory. The track indicator returns to a "00" and the Program No. advances to "P - 02".

PROG

4.Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the memory.

5.Press the PLAY/PAUSE button to begin programmed playback. The “PROG” indicator stops

flashing and remains in the display. The player will

 

PROG

 

play the tracks you selected in the programmed

 

 

 

order. When the last track has played the player

 

 

 

 

 

 

stops and the total tracks and playing time appear.

 

 

 

6.To cancel programmed playback press the STOP button twice. The program will also be canceled if the CD Door is opened or if the power is interrupted.

10

HD2800_ib.p65

10

2001/4/9, AM 10:48

Page 11
Image 11
Emerson HD2800 manual Programmed Playback