Manuals / Emerson / Portable Media / Portable CD Player

Emerson HD2850 owner manual Operating Instructions, Normal Playback

Models: HD2850

1 16
Download 16 pages 52.26 Kb
Page 8
Image 8

OPERATING INSTRUCTIONS

NORMAL PLAYBACK

1.Connect the headphones to the PHONES jack. Set the VOLUME control to a low level before you begin playback and then adjust the volume to a comfortable level after playback begins.

2.Slide the CD Door OPEN switch to the right to release the lock and open the CD Door.

To PHONES Jack

3.Place your disc on the center spindle with the printed label side facing up. Press down gently near the center hole to make sure the disc is properly seated on the spindle.

4.Close the door completely until it locks shut.

5.Press the PLAY/PAUSE button. “45 sec” followed by “00” appear in the display as the player reads the disc, then playback begins on Track 1. The Anti-Skip indicator comes on and the playing time shows in the display.

6.Adjust the VOLUME and DBBS (Bass Boost) controls as desired.

NOTE: We have included a second volume control on the headphone cable. This allows you to easily adjust the volume if you are carrying the main unit in a pocket, handbag, backpack etc.

7.When all tracks have been played the player stops and the display shows the total tracks and playing time on the disc. After approximately 1 minute the power shuts off and the display goes blank.

To stop playback before the disc ends press the STOP button at any time. Press the STOP button again to shut the power off immediately.

8.Slide the CD Door OPEN switch to the right to open the door and remove your disc. Close the CD Door and return your disc to its protective storage case.

7

ON

BASS OFF

VOL.

 

HD2850_ib.p65

7

8/10/01, PM 03:49

Page 7 Page 9
Page 8
Image 8
Emerson HD2850 owner manual Operating Instructions, Normal Playback
Page 7 Page 9

HD2850 specifications

The Emerson HD2850 is a state-of-the-art process control instrument specifically designed for critical applications in various industries, including oil and gas, chemical processing, and power generation. This robust device is engineered to provide accurate measurement and control capabilities, enhancing operational efficiency and safety.

One of the standout features of the HD2850 is its advanced digital signal processing technology. This allows for precise data collection and analysis, ensuring that users receive real-time information with minimal latency. The incorporation of this technology enhances the instrument's ability to operate under a wide range of environmental conditions, making it suitable for harsh industrial settings.

Another significant characteristic of the HD2850 is its modular design. This design allows for easy customization and scalability, enabling users to adapt the instrument to their specific needs. With interchangeable modules for various sensing technologies, including pressure, temperature, and level measurement, the HD2850 can be configured for a diverse set of applications.

Reliability is another crucial feature of the HD2850. The device is built with high-quality materials and is rigorously tested to ensure longevity and durability. This reliability minimizes downtime and maintenance costs, providing a cost-effective solution for industrial operations.

The user interface of the HD2850 is designed with practicality in mind. Featuring a bright, intuitive display, users can easily navigate through menus and adjust settings as needed. Additionally, the device supports remote monitoring and control, allowing operators to oversee processes from a distance and respond to potential issues promptly.

The HD2850 also incorporates advanced diagnostic capabilities. These diagnostics provide users with critical insights into the health of the system, enabling predictive maintenance and reducing the risk of unexpected failures. This feature is particularly beneficial in industries where safety and reliability are paramount.

In summary, the Emerson HD2850 is a top-tier process control instrument characterized by its advanced digital signal processing technology, modular design, reliability, user-friendly interface, and comprehensive diagnostic capabilities. Its versatility makes it an invaluable tool across various industries, helping optimize processes while ensuring safety and efficiency.