Emerson iP500BKC, iP500WHC, iP500C owner manual ALARM, SNOOZE, and Sleep to Music Functions

ALARM, SNOOZE, AND SLEEP TO MUSIC FUNCTIONS

Setting The Alarm Time and Alarm Mode

1.) If the system power is ‘On’, press the Power button to shut the power ‘Off’. The power must be ‘Off’to set/adjust the alarm time.

2.) With the correct time of day appearing on the display, press the Mode button once. The display changes from current time to alarm time and the alarm time flashes.

One of the alarm mode icons also appears in the display.

3.) While the alarm time display is flashing press the Tuning + () / – () buttons

on the top panel or TUN / buttons on the remote control to set the Hour display forward or backward to the desired wake-up hour.

Example: AM 6:00.

Be sure to observe the PM indicator to confirm that you have set the hour correctly. If no PM indicator appears the time display is AM.

4.) Press the Volume + or Volume – buttons to set the Minute display forward or backward to the desired wake-up minute.

Example: AM 6:45.

5.) When the display is showing the desired wake-up time press the Mode button once more and the Alarm Mode icon (BUZ, RAD, iPod) will begin to flash.

6.) Press the Volume + or Volume – buttons to select the desired wake up mode: BUZ (Buzzer), RAD (Radio), or iPod.

7.) After 10 seconds the alarm display will stop flashing and the correct time display reappears.

34

iP500_030606r.p65 34

6/3/2006, 15:09