Emerson I-0021, NGA 2000 manual 16

Text Line
	TAG	-- Calibration Procedure Status					37.50 ppm
	Procedure status:						Ready
	Remaining procedure time:							0 s
	Current/expected gas flow:					Samplegas
	Concentration in span gas units:					37.50 ppm
	----------------------Last zero calibration:		Results	----------------------			Success
	Last span calibration:						Success
	Last zero calibration was:			Fri 05-29-1998 13:32:06
	Last span calibration was:			Fri 05-29-1998 13:37:23
	Successful zero+span calibrated ranges:					1+2+3+4
	Measure	Cancel !			Back...		More...
	F1	F2	F3		F4		F5

Function Softkey Menu Softkeys

3.5 Important Functions of the Softkeys

Display

♦Change from the single component display to the multi component display.

♦F1 in the single component display.

Measure

♦Change from all menus and submenus to the single component display of the channel selected.

♦F1.

Status (see section 4.1 p. 4-3!)

♦Change to the menu "Analyzer Channel Status":

Display of the most important parameters and information about the status of the current channel or module.

♦If available: F2.

Main (see section 3.8 p. 3-7!)

♦Change from the single component display to the main menu.

♦F3 in the single component display.

Channel

♦Scrolling through the channels in the same menu. In the main menu and the single component display you can move among all channels of the connected analyzers and analyzer modules. In the submenus you can only move among the channels of the current analyzer or analyzer modules.

♦If available: F3 (F4 in the single component display).

3 - 4 NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98