3.7 Starting a function

If you press the 8 -key or the ® -key in a function line, you will be asked to confirm the order in the following way:

TAG

37.50 ppm

-- Confirmation Required --

Do you really want to do this ??

Press "Yes" or "Back..."

YesBack...

F1

F2

F3

F4

F5

♦If you will press the F2 key, the function will start immediately.

♦If you will press the F4 key, you will go back to the last menu page.

Note: If you don't want to be asked before the start of each function, you can configure it in the menu "Measurement Display Configuration" in the expert configuration level (see section 5.1.8 p. 5-49).Select "No" in the line "Display confirmation menus". Then, each function will start directly after the order is done and no confirmation will be required.

3 - 6

NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98