6.2 Date and Time

Main Menu — System configuration and diagnostics

 

 

 

 

 

 

 

 

 

↓

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Date and time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

↓

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TAG

 

 

 

 

 

 

 

 

 

37.50 ppm

 

 

 

 

 

 

 

 

 

 

 

 

 

-- Date and Time --

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time display format (am/pm):

 

 

 

 

24 Hrs

 

 

 

 

 

 

 

 

Minutes:

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hours (1...24):

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

Year:

 

 

 

 

 

 

 

 

 

1998

 

 

 

 

 

 

 

 

Day:

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

Month:

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Network updating:

 

 

 

 

 

 

 

Enabled

 

 

 

 

 

 

 

 

Current time:

 

 

 

14:01:35 12 May 1998

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Measure

 

 

 

 

Set !

 

Back...

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

F2

 

F3

 

F4

F5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the menu "Date and Time" you can set up the date and the time of the control module (platform or MLT analyzer).

Line of variables "Time display format (am/pm)":

In this line you can decide, if the time of the control module should be displayed in the 12 hours format or in the 24 hours format.

Line of variables "Network updating":

All modules combined with the control module can use its date and time setup, auto- matically.

Set up a new date or time:

1)Press the 8 -key or the → -key in the line "Minutes", "Hours", "Year", "Day", or "Month" to select the corresponding number.

2)Select any digit with the ← -key or the → -key and adjust a new value with the − -key or the ↓ -key.

·Options:

„Minutes: 0 to 59

„Hours: 0 to 23

„ Year:

manufacturing year (e.g. 1998) to 2035.

„ Day:

1 to 28/30/31 depending on the month selected

„Month: 1 to 12

3)Press the F3 key to set the new date or time. The new adjustment will appear in the line "Current time". The display in this line will be refreshed every five second.

6 - 6

NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98