MLT25/CH2/R2

95.00 ppm

-- First Auxiliary Line Source --

MLT25/CH2

Measure

 

<<<

Back...

>>>

F1

F2

F3

F4

F5

¨Select the line you want with the − -key or the ↓ -key.

If there are more than eight modules available, you can change to another menu page with the F5 key.

¨Press the 8 -key or the → -key to enable the module selected as line source: The display will go back to the menu "Auxiliary Lines", automatically.

The selection will be done.

Note:

To select the measurement parameter for each auxiliary line of the single component display, you have to change to the menu "Measurement Display Configuration" of the "Analyzer and I/O-module expert configuration" (see section 5.1.8 p. 5-49).

7 - 4

NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98