Emerson I-0021, NGA 2000 manual 52

TAG						37.50 ppm
	-- Analyzer Operation Settings --
Remote control:							Enabled
Range change control:							Manual
Range:								1
Range upper limit:					50.00			ppm
Span gas concentration:					50.00			ppm
t90-time:							2.00 s
Hours of operation:								164
Last re-start occured:			8:40:35		June 22,			1998
Actual zero gas concentration:					0.00			ppm
Auto-start procedures...
Measure		Channel		Back...
F1	F2	F3		F4		F5

TAG						37.50 ppm
		-- Auto-Start Procedures --
Position in auto-start list:						1
Channel tag:						-
Procedure type:						-
Interval mode:							Never
Start time:						-
Start date:						-
Time & Date:				16:03:25 June 22, 1998
Measure					Back...
F1	F2	F3		F4	F5

TAG
37.50						ppm CH4
0.00			Range: 1		50.00
Failures:			No
Maintenance-Requests: No
Temperature:			20.0 C
				0.0			100.0
Operation:		Ready
Display	Status...		Main...		Channel			Calib...
F1	F2		F3		F4			F5

⇒Change to the submenu "Auto- Start Procedures"

Press

⇒Change to the single component display

Note:

In the menu "Auto-Start Procedures" you can control the status of the three kinds of time controlled calibrations. (see 5.1.1 p. 5-12/13)

⇒Back to the single component display of the current channel

4 - 32 NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98