Emerson I-0021, NGA 2000 manual 55

4.3 Multi Component Display

MLT25/CH1/R2
2.50						%CO2
0			Range: 2				5.00
Temperature:			25.0 C
				0.0			100.0
Maintenance-Requests: No
Any_Alarms:			No
Operation:		Ready
Display	Status...		Main...		Channel			Calib...
F1	F2		F3	F4		F5

Change of Channel

⇒Change to the multi component display

F1

Press

Note:

You can change to the multi component display from each single component display.

2.50		MLT25/CH1
					0.00		[		2]	5.00
				%CO2
95.00
		MLT25/CH2
					0.00			[2]		250.00
				ppm CO
333.0
		MLT25/CH3
					0.00		[2]			500.00
			ppm SO2
150.0		MLT25/CH4
					0.00		[2] F.S.			150.00
				ppm NO
20.00
		MLT25/CH5
				%O2	0.00		[2]			100.00
Select	Status...			Tags Off						LCDReset
F1	F2	F3	F4				F5

2.50		MLT25/CH1
					0.00		[		2]	5.00
				%CO2
95.00		MLT25/CH2
				ppm CO	0.00			[2]		250.00
333.0		MLT25/CH3
					0.00		[2]			500.00
			ppm SO2
150.0		MLT25/CH4
				ppm NO	0.00		[2] F.S.			150.00
20.00
		MLT25/CH5
					0.00		[2]			100.00
				%O2
Select	Status...			Tags Off						LCDReset
F1	F2			F3		F4				F5

⇒Enable the "selecting symbol": >

F1

Press or

Notes:

·In each bargraph you will find the begin and end of range of the corresponding channel. (F.S. = full scale)

·The number in parentheses shows the number of the selected range.

Option:

With the F3 key you can fade out or in the tags.

⇒Select any channel

Press or

as often as necessary to put the > - mark into the line you want to select.

Example:

Change from

CO2 (Channel 1) to

CO (Channel 2)

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000 4 - 35