II) V24/RS232/485 Interface - Single Analyzers and Systems
ALCH – Read command "Deviations of the last linearization check"
To this read command the analyzers in a system or the single analyzer will send to the TBCC the following data for the called channel (device) and subchannel (range):
∗The determined and stored deviations of the last linearization check in ppm.
∗The information if these deviations will be in the lawful tolerances. That means: Is the check o.k. or not ?
Read command
ALCH Kn Mx
Read of channel n and range x
Code
Response
ALCH 0 IO AAA BBB ... XXX
xth difference
2nd difference
1st difference
Checked result is o.k. (otherwise NO)
Error status
Code
90003752(1) | AK | 2 - 61 |