ASOL – Read command "Setpoint value with limits"
To this read command the FU will send to the TBCC the following data for the called channel (FU) and subchannel (e.g. heating):
∗The adjusted setpoints with deviation limits for error reports. For the actual used devices subchannel "m" will be:
m = 0 Concentration
m = 1 Temperature
m = 2 Pressure
m = 3 Flow
m = 4 Pocket calculator No. 1 m = 5 Pocket calculator No. 2 m = 6 Pocket calculator No. 3 m = 7 Pocket calculator No. 4
These assignations may be changed for devices used in the future !
Read command
ASOL K0 m
ASOL Kn m
Read of channel n and subchannel m
Code
Response
ASOL 0 WWW xxx XXX
Upper limit
Lower limit
Setpoint value
Error status
Code
2 - 72 | AK | 90003752(1) |