PREPARATION FOR USE
Unpacking And Set Up
•Carefully remove the unit from the display carton and remove all packing material from the unit.
•The FM Antenna is built in the AC power cord. Unwind the AC power cord and extend it to its full length for best FM reception.
•Note the Serial Number on the back panel of your system and write this Number in the space provided on the Warranty page of this manual.
•Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, humidity, or strong magnetic fields.
•Raise the lid to expose the phonograph. The phonograph has been secured for shipment with a transit screw. Use a coin or screwdriver to turn the transit screw clockwise. This will allow the turntable to “float”.
TRANSIT SCREW
4
NR101TT_072507.p65 | 4 |
25/7/2007, 10:18
