PLAYING CASSETTE TAPES

Note: Before inserting a tape in the player be sure that there is no excess slack in the cassette that could become jammed in the mechanism. Refer to the Care and Maintenance section for instructions on removing excess slack from the cassette.

1.) Rotate the ON/OFF-VOLUMEcontrol clockwise until a ‘click’is heard and set the Volume to a low level.

2.) Insert your cassette into the slot, as shown in the illustration, with the side you wish to play facing ‘up’and the open end on the right side.

Cassette Tape

Open End

Note: There is no ‘TAPE’position on the Function selector. When you insert a cassette onto the player the system automatically switches to the Tape mode.

3.) Cassette playback begins as soon as the tape is inserted. Adjust the ON/OFF- VOLUME control to the desired level.

4.) To advance the tape rapidly, depress the EJ/FF (Eject/Fast Forward) button approximately half way. The tape will move forward rapidly as long as the button is depressed. Normal playback will resume when the button is released.

E J

/

F.F

5.) When the tape ends the player stops automatically. Depress the EJ/FF (Eject/Fast Forward) button completely to remove the cassette from the player. You may press the EJ/FF (Eject/Fast Forward) button to stop playback and remove the cassette at any time.

E J

/

F.F

6.) To turn the system ‘off, rotate the ON/OFF-VOLUMEcontrol counter clockwise until a ‘click’is heard.

12

NR305TT_050704.p65

12

7/5/2004, 10:31

Page 13
Image 13
Emerson NR305TT owner manual Playing Cassette Tapes, Cassette Tape Open End