OPERATING INSTRUCTIONS

LISTENING TO THE RADIO

1.) To turn the system ‘on’, rotate the ON/OFF-VOLUMEcontrol clockwise until a ‘click’is heard, and set the Volume to a low level. The Tuning Dial light comes ‘on’.

2.) Set the FUNCTION selector (AUX/CD/TUNER) to the TUNER position.

3.) Set the BAND selector (AM/FM/FM ST.) to the desired band..

4.) Rotate the TUNING control to tune to the desired radio station. If you selected the FM ST setting and you tune to an FM Stereo station, the FM STEREO indicator will come ‘on’.

If FM Stereo reception is noisy or weak, set the BAND selector to the ‘FM’ position. This will normally improve the reception but the sound will no longer be in stereo,

5.) Adjust the ON/OFF-VOLUMEcontrol to the desired level.

6.) When you are finished listening turn the ON/OFF-VOLUMEcontrol counter clockwise until a ‘click’is heard.

Antenna Information

The AM antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the cabinet slightly until the internal antenna is picking up the strongest signal.

The FM wire antenna is located on the back cabinet. If necessary adjust the position and direction of this antenna until you find the position that provides the best reception.

8

NR53_010704.p65

8

7/1/2004, 17:24

Page 9
Image 9
Emerson NR53 owner manual Operating Instructions, Listening to the Radio, Antenna Information