OPERATING INSTRUCTIONS
Setting The Clock
Note: The clock can only be set at TAPE mode, or when power is ‘Off’.
1.) Press the CLOCK/MEMORY/AUTO PRESET button on the top panel.
“12 H” will begin flashing in the display indicating that the clock is set for “American”
Press either the 
or 
button on the top panel to change the clock format to “European”
The display will change from “12H” to “24H”.
2.) Press the CLOCK/MEMORY/AUTO PRESET
button. The Hour digits will begin flashing.
3.) Press the 
or 
buttons to set the display to the correct Hour, AM or PM.
4.) Press the CLOCK/MEMORY/AUTO PRESET button again. The Minute digits will begin flashing.
5.) Press the 
or 
buttons to set the display to the correct Minute.
6.) Press the CLOCK/MEMORY/AUTO PRESET
button once more.
The colon “ : ” begins flashing and the clock starts to run.
Notes: The correct time will always appear on the display in TAPE mode and when power is ‘Off’.
9
PD3812_B032305.p65 | 9 |
23/3/2005, 15:02
