Emerson PD9814 owner manual Making a Tape Recording

IMPORTANT:

Always press the Stop/Eject key to shut off the tape motor before opening the cassette door to remove your tape. The Automatic Stop System does not

function in the F.Fwd and Rewind modes. When the tape ends in the

F.Fwd and Rewind modes the motor continues to run. You must press

the Stop/Eject key to shut off the motor before opening the door to remove your tape.

Making A Tape Recording

This model allows you to make tape recordings directly from the CD player, or the radio.

•Refer to “Playing Compact Discs” if necessary to operate the CD player.

•Refer to “Listening To The Radio” if necessary to tune in the station you wish to record from radio.

1.) Press the Stop/Eject key to open the cassette door.

2.) Insert a good quality blank cassette tape into the slots on the cassette door with the open end facing down and the full reel on the left. Use normal tape only. Do not use tape identified as “CrO2”(Chrome) or “Metal”tape formulations. For best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute or 120 minute tapes as these thinner tapes are more likely to jam in the mechanism.

3.) Close the cassette door.

4.) When you are ready to start recording press the Record key. The Play key will also engage. The CD you are playing, or radio program you selected will be recorded directly on to the tape.

5.) Press the Pause key during recording to stop the tape temporarily and avoid recording unwanted material such as radio commercials.

6.) When you have finished recording press the	Stop/Eject key to stop and
remove the tape.

18

PD9814_053105.p65 18

31/5/2005, 10:31