Emerson RP6289 owner manual Operating Instructions, Playing The Radio, Using Earphones/Headphones

OPERATING INSTRUCTIONS

PLAYING THE RADIO

1.) If you have installed “AA” batteries, set the DYNAMO/BATT selector switch to BATT position. To power the radio using the rechargeable pack or the generator, set the DYNAMO/BATT selector switch to DYNAMO position.

2.) Rotate the VOLUME control clockwise () to turn the radio “On”.

3.) Set FM/AM band selector to the desired band. If you selected the FM band, extend the FM rod antenna to its full length.

4.) Rotate TUNING control to select the desired station.

5.) Adjust VOLUME control to a comfortable listening level.

6.) To turn off the radio, rotate the VOLUME control fully counterclockwise ( ).

USING EARPHONES/HEADPHONES

To listen to the radio privately, connect an earphone or headphone (not including) with a 3.5-mm (1/8-inch) plug to the jack beneath the rubber flap on the side of the radio. Plugging in an earphone or headphone disconnects the internal speaker.

USING THE FLASHLIGHT

Slide the HI/OFF/LO switch on the top of the unit to the

HI or LO position to turn the light “On”.

Slide the HI/OFF/LO switch to OFF to shut the light “Off”.

LIGHT

OFF

HILO

Note: The operating time of the flashlight will be longer when the light switch is set to the “LO” position.

8

RP6289_030504.p65 8

5/3/2004, 11:02