PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing press the STOP 
button to stop playback before you begin the programming steps below.
1.) Move the FUNCTION selector to CD, insert your disc in the player, close the door, and wait until the total track number appears in the display.
2.) Press the CD PROGRAM button once. The Program Indicator flashes and program memory “01” begins flashing in the display.
3.) Use the SKIP/SEARCH 
/ 
buttons to select the first track to be programmed. (Example: Track 8).
4.) When track number “8” appears in the display, press the PROGRAM button once again to enter the track “8” in program memory number “01”. Track number “8”disappears and program memory number “02” begins flashing in the display, indicating that you may now select a track to be entered in program memory number “02”.
5.) Use the SKIP/SEARCH 
/ 
buttons to select the next track to be programmed. When the desired track number appears in the display press the PROGRAM button again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory. When the memory is full, the LED display shows the programmed tracks
7.) To begin programmed playback press the PLAY/PAUSE 
button. The LED display will show the first programmed track and playback will begin on that track. The Program Indicator lights.
12
SB280_033104.p65 | 12 |
31/3/2004, 10:45
