Emerson dimensions Specification for SiteI/O 32/0

Specification for SiteI/O 32/0

DESCRIPTION: The SiteI/O 32/0 is part of the SiteI/O-Line, which allows a complete SiteScan monitoring/control system to be built a piece at a time. It is a 32 bit microprocessor-based device designed to monitor up to thirty-two analog, digital, and/or dry contact type signals. Individual hardware jumpers set signal-type selections. Screw terminal blocks are provided to terminate power, communication, and input signal wiring.

DIMENSIONS:	Module:	11 5/16” H x 11 5/16” W x 2 3/4” D
		28.73 cm H x 28.73 cm W x 7 cm D
	Enclosure:	20" H x 18" W x 2.87" D
	(Painted Steel)	508mm x 457.2mm x 72.89mm
	See Enclosure Diagrams for mounting options.
POWER:	24VAC ± 10%, 50-60 Hz., 35 VA power consumption
	(120/24VAC 40VA Transformer available)
INPUTS:	Thirty-two universal inputs, configurable for 0-5VDC, 0-20mA, or thermistor.

ENVIRONMENTAL

OPERATING RANGE: 0° to 130° F (-17.8°to 54.4° C), 10 to 90% relative humidity, non-condensing

COMMUNICATION: (1) CMnet EIA-485 Port - Control Module network screw terminals Switch selectable baud rates ARC156 / 9600 or 38.4bps Recommended wire is: MAGNUM Cable pn A3-ARC-156-2

(32)Analog and/or Digital - screw terminals Jumper Selectable inputs Thermistor - 10k ohm @ 77° F, 25°C

0 to 5 VDC - 10k ohm max source impedance

4 to 20mA - 24VDC loop power, 250 ohm input Dry Contact - 0.5mA sense current

MEMORY:1 MB Flash Memory, 1 MB Non-volatile battery backed RAM.

PROTECTION: Voltage, current, and ESD protection on incoming power.

Liebert Corporation Page 1 of 5 SL-28073Rev. 4; 7/03