Emerson XWEB5000 Installation, One blade and one cross screwdrivers Mouse PS2, Keyboard PS2

Models: XWEB5000

1 48
Download 48 pages 51.89 Kb
Page 6
Image 6
2. INSTALLATION

2. INSTALLATION

Do not open XWEB. Its opening makes its warranty invalid. However, to install XWEB you need:

One blade and one cross screwdrivers

Mouse PS2

Keyboard PS2

Standard VGA screen (no high definition/HDMI)

To install XWEB, please refer to the picture below which represents the back of XWEB. Apply then following procedure:

1.XWEB has grounding receptacle. Verify the implant in which it will be connected to adopt electrical ground protection;

2.Fix XWEB at its operating position. In case of placement on a table insert provided rubber feet. In case of usage on rack, use provided brackets and

 

screws.

 

 

 

 

 

Connect XWEB to the electrical network with

3.

To connect XWEB to the electrical

provided

cord before any

servicing operation.

This is for personnel and system safeguard.

 

 

network use provided power supply

 

 

cable(1).

Power

supply

cable

shall

 

 

 

 

 

always be easily accessible by an

 

 

 

 

 

operator. Do not power the system

 

 

 

 

 

on.

 

 

 

 

 

 

 

 

 

4.

Connect

RS485

network,

relays

and

Operators

shall avoid

direct passage

of

 

digital input (3).

 

 

 

 

 

 

 

 

 

electronic devices that can cause electric

 

 

 

 

 

 

 

5.

Connect to telephonic line network

discharges and damage the device itself;

 

 

and/or to LAN (4).

 

 

 

 

Power supply voltage shall not differ from the

 

 

 

 

 

 

 

6.

Connect

keyboard

and

mouse

with

one required. It can seriously damage the

 

provided cable (5).

 

 

 

system;

 

 

 

7.

Connect monitor (5).

 

 

 

Mistaken connections can be dangerous and

8.

Connect

printer

to

USB

or parallel

compromises operators’ safety. Moreover

they

can damage the system and/or other connected

 

receptacles.

 

 

 

 

 

 

 

 

 

instruments.

 

 

 

 

 

 

 

 

 

 

 

9.Connect optional external modem (7). Adopt one or more external isolator switches to

Its cable shall be maximum 10 meters separate devices to power supply network. They

long.

 

shall easily accessible.

 

 

 

 

 

 

10. Power the system on, pressing

and

Do not use XWEB in environments

with

 

releasing button (2).

 

 

 

inflammable gas.

 

 

 

 

 

 

 

 

Do not modify XWEB in any way.

 

 

 

 

 

 

 

 

 

 

 

 

1592010860 XWEB5000 stp GB r1.1 2012.06.22.doc

 

XWEB5000

6/48

 

Page 6
Image 6
Emerson XWEB5000 manual Installation, One blade and one cross screwdrivers Mouse PS2, Keyboard PS2