Operation

Once you have decided upon a location for your X-Ref 12 DSP Powered Subwoofer, and connected and configured it and all associated equipment, operation is very simple.

•Plug your X-Ref 12 into a grounded electrical outlet of appropriate voltage.

(The X-Ref 12 will automatically switch between 110-120 VAC and 220-240 VAC.)

•Connect a signal source to either the unbalanced (RCA) or balanced (XLR) input on the rear panel of the X-Ref 12.

•Place the Power switch on the rear panel of the X-Ref 12 in the On position.

•Immerse yourself in the music!

In general, once your X-Ref 12 is properly connected and configured, no explicit control by the user is required.

Rotary encoder and back lit LCD display

The push-to-engage rotary encoder (located on the top panel of the X-Ref 10) is used to enter or change configuration information; the encoder is active when the display is lit. The encoder is made of a soft rubber material, and rotates when gentle pressure is applied. In general, the encoder is rotated to change a displayed value, and pressed like a button to accept a value or enter a command. You will probably find it easiest to rotate the encoder using your thumb and one finger positioned on the top surface near two opposite sides; you can press the center or the entire top surface. The display and encoder will disengage and “sleep” if idle for a short time, but will remain active if you pause while in the middle of a configuration sequence. A single press of the encoder will activate the display and engage the encoder when it is off.

Status display

The X-Ref 12 includes a small status LED towards the top of the rear panel. When the X-Ref 12 is powered on, but no signal is present, this LED will glow red to indicate that the X-Ref 12 is in low-power Standby mode. When signal is present and the subwoofer is operating, or when the LCD display is in use, this LED will glow green.

Automatic switching

When the Power switch is in the On position, the X-Ref 12 will wait in Standby mode until a signal is present at either input, at which point it will turn on. After several minutes with no signal, the X-Ref 12 will return to Standby mode.

Movie EQ Trigger

If the X-Ref 12’s Movie EQ trigger is connected to a pre/processor, a boost in low bass of about +6 dB at 45 Hz will be activated whenever +12 V is present on the trigger input.

Page 19

Page 22 Page 24
Page 23
Image 23
Emotiva X-Ref 12 Operation, Rotary encoder and back lit LCD display, Status display, Automatic switching, Movie EQ Trigger
Page 22 Page 24

X-Ref 12 specifications

The Emotiva X-Ref 12 is a powerful and high-performance subwoofer designed for audiophiles and home theater enthusiasts seeking deep, impactful bass. With its sleek design and advanced technology, the X-Ref 12 enhances any audio-visual experience, making it an essential addition to your audio setup.

One of the standout features of the X-Ref 12 is its impressive 12-inch high-excursion driver. This driver is engineered to deliver deep, low-frequency extension and precise control, ensuring that every bass note is rendered with clarity and power. The robust construction of the driver minimizes distortion, allowing for an immersive listening experience that captures the full range of frequencies without compromise.

The subwoofer is equipped with a class D amplifier that delivers a powerful output of up to 300 watts RMS, enabling it to produce deep, impactful bass that can fill even the largest rooms. The amplifier is highly efficient, providing optimal performance without generating excessive heat, ensuring longevity and reliability.

One of the highlights of the X-Ref 12 is its advanced DSP (Digital Signal Processing) technology. This technology allows for precise tuning and adjustment of the subwoofer’s output to match the acoustics of your specific listening environment. Users can easily customize settings such as phase, crossover frequency, and equalization, making it possible to fine-tune the performance for an ideal sonic experience.

The design of the X-Ref 12 is both functional and aesthetically pleasing. It features a rugged MDF cabinet that minimizes resonance and vibration, providing a stable platform for the driver. The modern, stylish finish makes the subwoofer an elegant addition to any room, seamlessly blending with different home décor styles.

Versatility is another key aspect of the Emotiva X-Ref 12. It includes multiple input options, including both line-level and LFE, ensuring compatibility with various audio systems. This adaptability makes it suitable for use in both stereo and surround sound setups, allowing users to enjoy the full potential of their audio systems.

In summary, the Emotiva X-Ref 12 subwoofer stands out with its impressive driver, powerful class D amplifier, advanced DSP technology, and versatile connectivity options. Whether you're watching movies, playing video games, or listening to music, the X-Ref 12 delivers an unparalleled bass experience that brings your audio content to life.
Top Page Image Contents