SASSAFRAS SUPER SIZE LOG PLACEMENT

Before you begin: Do not, handle these logs with your bare hands! Always wear gloves to prevent skin irritation. After handling logs, wash your hands gently with soap and water.

All Logs

The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and firmly positioned in the appliance.

Refer to Figure 1 for the following warning.

Warning: Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.

PROPER INSTALLATION SEQUENCE: LS-(18, 24, 30)RSS

(Figure 1)

1.Place left, rear (#1) log onto left, rear pin on rear log support.

2.Place right, rear (#2) log onto right, rear pin on rear log support.

3.Place left, front (#3) log onto two (2) left, front pins on burner pan.

4.Place right, front (#4) log onto two (2) right, front pins on burner pan.

5.Insert boss on left, top (#5) log into recess on left side of left, rear (#1) log and onto left side of left, front (#3) log.

6.Insert boss on center, top (#6) log into recess on right side of left, front (#3) log.

7.Insert round boss and square recess on (#7) right, top log into recess and boss on center, top (#6) log.

8.Compare the completed log installation with the appropriate photo from pages 5 through 7. Review previous steps to make any necessary adjustments.

9.Log placement is completed.

Attention: Do not use Figure 1 to order replacement logs. Refer to Page 12 Parts List and Parts View to order logs for your appropriate model number.

Apply loose material (glowing embers) per appropriate Installation Instructions and Owner's Manual. Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, Inc. Application of excess loose material (glowing embers) may adversely affect performance of the heater.

WARNING: All previously applied loose material must be removed prior to reapplication.

Replacement Loose Material (glowing embers) Part Number

LS-18RSS

15999

LS-24RSS

15970

LS-30RSS

15970

Platinum Bright Embers

PE20-1

7

6

5

2

14

3

Log Placement

LS-(18, 24, 30)RSS Logs

Figure 1

The following WARNING applies when log set is installed onto an unvented gas burner assembly.

WARNING: This appliance is equipped for (natural or propane) gas. Field conversion is not permitted.

Note: A single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers) to the burner.

Page 4

20171-3-0907

Page 4
Image 4
Empire Comfort Systems LS-24RSS-1 Sassafras Super Size LOG Placement, All Logs, Refer to for the following warning

LS-18RSS-1, LS-24RSS-1, LS-18RS-1, LS-24RS-1, LS-30RSS-1 specifications

Empire Comfort Systems has established itself as a leader in the heating appliance industry, particularly known for its range of direct vent gas fireplaces. Among these, the Empire Comfort Systems models LS-18RS-1, LS-24RS-1, LS-30RS-1, LS-30RSS-1, and LS-24RSS-1 stand out due to their innovative features and exceptional performance.

The LS series fireplaces are designed for both efficiency and aesthetic appeal. One of the main features across these models is their direct vent technology, which allows for greater efficiency compared to traditional venting methods. This means that they can draw in air from outside for combustion while expelling exhaust gases outside, creating a safer and more comfortable indoor environment.

All models in the LS series are available in various sizes, providing flexibility for different spaces. The LS-18RS-1, with its compact size, is perfect for smaller living areas, while the LS-30RS-1 offers a larger flame presentation ideal for expansive spaces. Each model comes with a sleek design that can seamlessly fit into various decors, making them a stylish addition to any home.

Another significant characteristic of these fireplaces is their easy installation process. The enclosed design of these units simplifies installation, thereby minimizing disruption during setup. Additionally, they operate using natural gas or propane, providing homeowners with options based on their preferences and availability.

The LS-30RSS-1 and LS-24RSS-1 models feature a remote control option, allowing users to conveniently adjust the flame height and heat output from across the room. This feature enhances user experience by combining comfort with ease of use. Furthermore, these fireplaces also incorporate a safety pilot system that ensures safe operation.

Equipped with durable materials and advanced technologies, the Empire Comfort Systems LS series fireplaces are built to last. They boast high heat efficiency ratings, making them an environmentally responsible choice for heating a home. With a variety of decorative options, including ceramic glass and custom faces, these fireplaces allow homeowners to personalize their settings to match their style.

In conclusion, the Empire Comfort Systems LS-18RS-1, LS-24RS-1, LS-30RS-1, LS-30RSS-1, and LS-24RSS-1 models represent the pinnacle of modern gas fireplace technology. From their efficient venting systems to user-friendly features and stylish designs, they offer homeowners the perfect blend of functionality and aesthetic. Whether for warmth or ambiance, these fireplaces are an investment that enhances any living space.