52X DDS CD-RW Drive

6.Connect the USB cable at the back of the drive to the USB header on the computer’s motherboard. The red wire of the cable needs to be plugged into Pin 1 on the board.

This drive supports USB 2.0 and if you connect to USB 1.1 connector, only transfer rate of USB 1.1 will be available.

IDE

USB

Red Wire

Red Wire

Mother

 

Error-Proof Pin

Board

 

Signal

Pin#

USB Header

Red/Vcc

1 / 6

 

White/D-

2 / 7

 

Green/D+

3 / 8

 

Black/Ground

4 / 9

 

Braided Shield Ground

5

 

Error-Proof Pin

10

 

If the connection is correct, the lower right LED on the front panel will light green.

7.Re-attach the cover of your computer, and reconnect the power cord and all cables.

5