|
| Check computer | Connect the camera to |
|
|
| the PC with the USB |
|
|
| cable and select [My |
|
|
| Computer] – [Control |
|
|
| Panel] – [System] – |
|
|
| [Device Manager]. In |
|
|
| the [Device Manager] |
|
|
| window delete |
|
|
| [Compose USB |
|
|
| device] or [Unknown |
|
|
| device] in [Other |
|
|
| devices]. Then |
|
|
| disconnect the camera |
|
|
| and install the |
|
|
| software before |
|
|
| reconnecting the |
|
|
| camera to the PC. |
Camera | Electrostatic | Check if the camera is | Turn off the camera |
malfunctions | discharge | connected to the PC | and then turn it back |
during use | interfered with |
| on. If connected to |
| the camera |
| the PC disconnect the |
|
|
| camera from the USB |
|
|
| cord, and turn it off |
|
|
| then on again. |
LCD | The LCD does | If you turn the power off | Press the LCD button |
| not light. | with the LCD off, the | once to turn on the |
|
| LCD screen is still set to | LCD. |
|
| OFF the next time the |
|
|
| power is turned on. |
|
Everything on | Camera | Sync firmware with PC | If the “Camera |
the LCD | firmware defect |
| firmware is out of |
flashes and “7” |
|
| sync. Update |
or “8” is |
|
| recommended. |
displayed |
|
| Update firmware?” |
|
|
| message appears when |
|
|
| you connect the |
|
|
| camera to your PC |
|
|
| with the USB cable, |
|
|
| click the [Yes] button |
|
|
| to update your |
|
|
| firmware. |
LCD displays | Incompatible | Format SD card | See Deleting an |
“E2” when a | file system on |
| image/Formatting |
SD memory | SD memory |
| flash memory or SD |
card is inserted | card |
| card in section 3 |
19
