Optical Mouse

Quick Installation Guide

Congratulations on your purchasing this exciting optical mouse. This multi-function optical mouse is with great features, the wheel for quick scrolling and two side buttons for extra functions (if with 5 keys). Beside, this optical mouse is without mouse ball, it will prevent you from the interference caused by dust. All those human-oriented characteristics make you feel more comfortable and efficient while surfing on the website or using applications. After the KeyMaestro driver installed, you will have seven extra functions to select for buttons, Quick Jump, Double Click, Window Zoom, Switch AP, Auto Panning, Back and Forward.

Moreover, the Quick Jump button is bonded with most often-used functions, Close Window, Horizontal Scroll Bar, Vertical Scroll Bar, Start Menu, Windows Explorer, Mouse Control Panel, Recall the Last Active Window, Exit and Size Grip. Please install the KeyMaestro Input Device driver to find more great functions!

System Requirement

!Microsoft® Windows 95, Windows 98, Windows® NT 4.0, Windows® ME, Windows 2000 or Windows XP operating system

Hardware Installation

Connect the Mouse to Your PC System

1.Turn off your PC system. Remember to turn off your PC system before you connect or disconnect the mouse unless you use a USB device in Windows 98, Windows 2000 or Windows ME.

PS2 Mouse Port

USB Mouse Port

Combo Adapter (USB to PS2 Mouse Port)

2.For PS/2 model, you can connect the mouse to the PS/2 port.

3.For the USB model, connect the mouse to the USB port on your PC system.

4.For the Combo (USB & PS/2) model, you will find a USB to PS/2 6-pin adapter is attached. This adapter helps you a lot on solving the USB to PS/2 port issue.

5.Turn on your PC system.

Software Installation:

1.Insert the disk labelled 'KeyMaestro Input Device Driver' into your disk drive.

2.Open File Explorer to find 'Setup.exe' from the disk.

3.Double-click the 'Setup.exe'.

4.Then follow the instruction on the screen to install the driver. The default install path is set to c:\MMaestro. You have the option to change the install path during setup.

5.Set up will indicate when installation has successfully completed. The driver is loaded when you see

the driver icon in the system tray (lower right corner of the screen). The operating system needs to restart.

Note: Before installing the KeyMaestro input device driver for USB or Combo optical mouse, you have to make sure that the USB device driver has been installed and the USB optical mouse is recognized by Windows operating system. You may press any button to see if it is correspondently, and thus to know the mouse works well.

1/1