Troubleshooting
| Symptom |
|
|
| Check Items | |||
1.No picture |
|
| 1. Check if the monitor is turned on (press the button |
|
|
| again). | |
|
|
|
|
| ||||
|
|
|
|
| ||||
2.LED indicator is not lit. | 2. Check if the power cord is properly connected to the monitor and power outlet. | |||||||
|
|
| 3 | .Check if there is electricity coming from the power outlet (use another device to check for power). | ||||
|
|
|
|
|
|
|
|
|
1.No picture |
|
| 1 | Check if your computer is turned on. |
|
|
|
|
2.LED indicator is orange | 2 | Ensure the computer is not in power saving mode (move the mouse or press a key on the keyboard | ||||||
|
|
|
| to wake up the computer). |
|
|
|
|
|
|
| 3 | Check if the video signal cable is properly connected to the monitor and computer. | ||||
|
|
|
|
|
|
| ||
1.Picture shows “ NO SIGNAL INPUT ” | 1 | Check if your computer is turned on. |
|
|
|
| ||
|
|
| 2 | Check if the video signal cable is properly connected to the monitor and computer. | ||||
|
|
|
| |||||
1.Picture shows “ INPUT SIGNAL OUT OF RANGE ” 1. Ensure that the resolution and/or refresh rate is set correctly. | ||||||||
Important | Make sure your display setup is under VESA1280X 720@75Hz |
|
|
|
| |||
- 7 -
