
LightPulse® LPe12000/LPe12002
Specifications
8Gb/s Fibre
Channel
PCI Express 2.0 Host Bus Adapters
Standards
·ANSI Fibre Channel: FC-PI-4, FC-FS-2,
·PCI Express base spec 2.0
·PCI Express card electromechanical spec 2.0
·Fibre Channel class 2 and 3
·PHP hot
Architecture
·
·8Gb/s, 4Gb/s or 2Gb/s FC Link speeds automatically detected
·Integrated data buffer and code space memory
Comprehensive OS Support
·Windows, Linux, NetWare, Solaris, VMware
·Additional support is available from OEMs and partners
Hardware Environments
·PowerPC,® SPARC,® x86, x64 and Intel® Itanium®
Optical
·Data rates: 2.125, 4.25 and 8.5Gb/s
·Optics: Short wave lasers with LC type connector
·Cable: Operating at 8Gb/s
-50/125µm (500MHz*km
-50/125µm (2000MHz*km
Physical Dimensions
·Short, low profile MD2 form factor card
·167.64mm x 68.91mm (6.60" x 2.71")
·Standard bracket (low profile available)
Power & Environmental Requirements
·Volts: +3.3, +12
·Operating temperature: 0° to 55°C (32° to 131°F)
·Storage temperature:
·Relative humidity: 5% to 95%
·23 degree C wet bulb
Agency Approvals
·Class 1 Laser Product per DHHS 21CFR (J) and
·UL recognized to UL
·CUR recognized to CSA22.2, No.
·
·FCC Rules, Part 15, Class A
·
·EMC Directive 2004/108/EEC (CE Mark)
-EN55022, Class A
-EN55024
·Australian EMC Framework
-AS/NZS CISPR22, Class A
·VCCI (Japan), Class A
·MIC (Korea), Class A
·BSMI (Taiwan), Class A
·EU RoHS Compliant (Directive 2002/95/EC)
·China RoHS Compliant
Ordering Information
·
-
·
-
Additional Features
·Performance Features
-Doubling the maximum Fibre Channel link rate from 4Gb/s to 8Gb/s and enhanced virtualization capabilities help support IT “Green” initiatives
-
·Data Protection Features
-
·Deployment and Management Features
-Universal Boot capability allows the appropriate boot environment to be automatically selected for any given hardware.
-Boot from SAN capability reduces system management costs and increases uptime.
-Detailed
-Beaconing feature flashes the HBA LEDs, simplifying their identification within server racks.
-Environmental monitoring feature helps to optimize SAN availability.
Management Features
·Emulex’s automated installation facilities and extensive management capabilities speed HBA deployment and device management, while reducing administration costs and protecting IT investment.
·Emulex LightPulse HBA management capabilities enable secure, centralized discovery, monitoring, reporting, and administration of Emulex HBAs on local and remote hosts. Powerful automation capabilities facilitate remote driver parameter, firmware and boot code upgrades. Advanced diagnostic features such as HBA beaconing and HBA statistics help to optimize management and network performance while the environmental monitoring feature helps to maintain optimum host to fabric connections. In addition to the GUI interface, management functions can also be performed via a scriptable Command Line Interface
(CLI) as well as a web browser. With
·Automated installation and configuration of driver and management tools simplifies deployment of multiple HBAs for Windows environments. A single installation of drivers and management utilities eliminates multiple reboots and ensures that each component is installed correctly and the HBA is ready to use.
·Emulex’s management instrumentation complies to Open Management Standards, such as
This document refers to various companies and products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or registered trademarks. This information is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex assumes no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice. This report is the property of Emulex and may not be duplicated without permission from the Company.
www.emulex.com
World Headquarters 3333 Susan Street, Costa Mesa, CA 92626 +1 714 662 5600
Wokingham, UK +44 (0) 118 977 2929 Munich, Germany +49 (0) 89 97007 177 Paris, France +33 (0) 158 580 022 Beijing, China +86 10 68499547