802.1Q Asymmetric VLAN settings example:
Port 1~16 in VLAN 1, port1~5 in VLAN 2, port1,6~9 in VLAN
3. All VLAN1~3 have access to Internet via port 1.
Note: The multi-need server must be support IEEE 802.1Q VLAN
Example2:
Figure 27. Asymmetric VLAN setting example
Step1: Enable Asymmetric VLAN function.
Step2: Add VID2 and set port 1~5 to “Untag Port” member, then apply setting.
Step3: Add VID3 and set port1 and Port 6~9 to “Untag Port” member, then apply
setting.
Step4: Set PVID Port 2~9 PVID value to below list:
Figure 28. Asymmetric VLAN’s PVID setting example
36