The included Infra Red Remote control allows you to operate ENXTV-X2 remotely, such as
turning your TV on/off, changing channels, adjust volume, etc. Aim the front of the Remote
Control at the Remote Control Receiver and press the control buttons as you would on the
infrared rays receiver.
4.1 Installing Batteries
Open the back cover of remote controller and put in two pieces AAA batteries
(alkaline battery recommended).
4.2 Remote controller functions
Power: power on/off control.
MUTE: Volume mute or resume.
Numbers: Program number select
TV/AV: Source select.
PC/TV: Switch to select PIPPC mode or full screen TV mode.
CH+: Channel Up.
CH-: Channel Down.
VOL+: Volume Up.
VOL-: Volume Down.
MENU: When in Full Screen Mode, this key is use for settings.
When in PIP Mode, this is use to move the PIP screen in conjunction
with the CH+/- keys to move PIP screen high and low, and with the VOL
+/- keys to move the PIP screen right and left
EXIT: Exit form current Menu setting.
PIP: Enter into PIP mode.
MODE: When in PIP Mode: MODE key is use to change the PIP screen display
size. When in Full Screen Mode: MODE key is use to change the ENXTV-X2
resolution settings. Example: 800x600x85 Hz to 1024x768 60Hz,
1280X1024Hz.
MULTI-DISPLAY: Multi-picture display. Displays up to 16 video Windows.
SKIP: Skip / No skip current TV channel.
SLEEP: Set to Sleep timer and Off Sleep.
SYS: double click to return default setting
OSD: On Screen Display