6. LIGHTING INSTRUCTIONS

A.Before attempting to light the heater, check all fittings and connections with a soap solution. NEVER USE A MATCH TO CHECK FOR LEAKS. Should a gas leak occur, do not attempt to repair or use heater. Return the heater to your dealer or the address given on back page.

B.Fuel – This heater must be used only with a vapor withdrawal LP gas bulk cylinder. THE BULK TANK MUST BE EQUIPPED WITH A STANDARD POL VALVE.

WARNING

USE HD.5 PROPANE GAS ONLY. DO NOT USE ANY OTHER TYPE FUEL. SEE YOUR PROPANE DEALER IF YOU HAVE ANY QUESTIONS REGARDING FUEL.

C.Turn the heater’s “Hi-Med-Lo-Off” regulator knob to “Med” (counterclockwise).

D.To light a burner, MH24T Model, place a lit match across the mesh screen where you see “light here” on reflector. (See fig. 4) THEN push in valve button on Safety Shutoff Valve. After the burner is lit, continue to hold valve button in for 30 seconds, then release the button slowly. CAUTION: DO NOT PUSH IN VALVE BUTTON BEFORE INSERTING LIT MATCH. Repeat step “D” for each burner.

E.To light a burner, MH24TS Model, push in valve button on Safety Shutoff Valve and at the same time push down on “Sparklite” Igniter button. Repeat push down of “Sparklite” Igniter button until burner ignites. After burner is lit, continue to hold valve button in for 30 seconds, then release the button slowly. Repeat step “E” for each burner of the MH24TS Heater. See fig. 4a.

F.If burner does not light within 30 seconds, turn the heater’s regulator knob to “off” (clockwise) and allow at least five minutes for gas to dissipate before attempting to relight.

Figure 4

G.NOTE: Should the orifice become clogged as indicated by low volume of gas when operating on “Hi” with a full cylinder, or should the heater fail to operate properly for any reason, return the heater to the dealer or the address given on back page for repair or replacement DO NOT ATTEMPT TO REPAIR OR TAMPER WITH HEATER.

H.Adjust heat output by turning knob to desired position.

I.COOKING: DO NOT USE THIS HEATER FOR COOKING.

7.SHUTDOWN AND STORAGE INSTRUCTIONS

A.The bulk propane tank “on-off” valve should ALWAYS be completely turned “OFF” when the heater is not in use.

B.When shutting off the heater, turn the regulator knob on the heater to “OFF” (clockwise). (See Figure 4 and 4a)

C.CAUTION: After turning unit off, heater will remain extremely hot. Allow at least 15 minutes for cooling before handling and storing. Detach heater from bulk tank before handling and storage. REMEMBER – POL fitting is a left-hand thread.

D.HEATER STORAGE: Always remove the propane cylinder from the heater when not in use. Always store propane cylinders in a cool, well ventilated place away from any flame or heat and in a location not used for habitation. DO NOT STORE PROPANE TANK WITHIN 60 FT. OF OPEN FLAME OR HEAT.

E.See Figure 6 for spare parts list.

Figure 4a

Mr. Heater Gas-Fired Infra-Red Portable Heater

6

Operating Instructions and Owner’s Manual

Page 5 Page 7
Page 6
Image 6
Enerco MH24TS owner manual Lighting Instructions, Cooking do not USE this Heater for Cooking
Page 5 Page 7

MH24T, MH24TS specifications

The Enerco MH24TS and MH24T are high-performance forced air propane heaters designed to deliver powerful heating solutions for a variety of spaces. These units are particularly favored in environments requiring rapid and efficient heating, such as construction sites, workshops, and larger garages.

One of the defining features of the MH24TS and MH24T is their impressive heating capacity. With a maximum output of 24,000 BTUs, these heaters are capable of warming up to 600 square feet effectively. This makes them ideal for large, open areas that need a quick temperature boost, ensuring that work can proceed uninterrupted even in cold conditions.

Both models come equipped with a reliable piezo ignition system, making it easy to start the heater without the need for matches or lighters. This feature enhances safety and convenience, especially in professional settings where time is of the essence.

The MH24TS model includes a specialized thermostat that allows users to easily set and maintain their desired temperature. This technology ensures that the space remains consistently warm, reducing the need for constant manual adjustments. In contrast, the MH24T provides a manual control system, offering simplicity and versatility for users who prefer straightforward operation.

Portability is another hallmark of these Enerco models. They are designed with a compact and lightweight structure, and some units feature a carrying handle, making them easy to transport from one location to another. Their robust construction ensures durability, even in rugged work environments.

Safety is paramount in the design of the MH24TS and MH24T. They are equipped with an automatic shut-off function that activates if the unit tips over or overheats. This feature provides peace of mind for users, knowing that the unit will cease operation under potentially hazardous conditions.

Overall, the Enerco MH24TS and MH24T represent a blend of innovative technology, safety, and portability, making them an ideal choice for anyone in need of reliable heating solutions. Their combination of efficiency and powerful performance positions them as standout options in the forced air propane heater market. With these units, users can tackle cold weather and maintain productivity with ease.
Top Page Image Contents